Wheel Masters Tire Pressure Valve Extenders - Straight - 4" Long - Qty 2
(68 reviews)
Price: $21.98
In Stock
Wheel Masters Tire Pressure Valve Extenders - Straight - 4" Long - Qty 2
Item # WM80294
Retail:$34.86
Our Price: $21.98
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (68)
- Q & A (0)
- Videos (2)
- Photos
Wheel Masters Accessories and Parts - WM80294
- Tire Repair Tools
- Valve Extenders
- Straight Extender
- Wheel Masters
- Silver
These straight valve extenders make it easy to access the valve stems on your tires. Each sturdy, nickel-plated brass tube is 4" long and screws onto your existing valve stem. Includes 2 extenders with caps.
Features:
- Allows easy access the valve stems on your tires
- Threaded head on extender screws onto your existing valve stem
- Long, straight tube extends existing valve stem
- Corrosion-resistant nickel-plated brass construction is long-lasting
- Included endcap replaces your existing valve stem cover
- Recommended for use on metal valve stems only
- Made in the USA
Specs:
- Length: 4"
- Quantity: 2 valve extenders with caps
- 1-Year warranty
80294 Straight Valve Stem Extenders by WheelMasters - 4" Long - Qty 2
Replaces RMT80294
Video of Wheel Masters Tire Pressure Valve Extenders - Straight - 4" Long - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Wheel Masters Tire Pressure Valve Extenders Review WM80292
Randy: Hey guys. Randy here at etrailer.com. Today we're going to be taking a look at some valve stem extenders from Wheel Masters. These are just the straight version. Basically anytime we're dealing with dual rear wheels like this, we usually have an air fitting that's hard to get to. That inner wheel generally doesn't allow itself to be very easily accessible.
You can see on ours here, it's just basically tucked right back in the end there, and while we can kind of get to it to get the cap off the end, it's just not ideal.Generally, when you're taking this cap off, what you'll do is drop it. And then you got to, kind of, get down there and dig in-between and try to get to it. So these are available, this is a three-inch version, but they're available in a two-inch extension or a four-inch extension. You want to be sure you're not using these on a rubber valve stem, they're just too heavy. They'll kind of flop around.
But, see that's a nice steel valve stem that we have there. And by using this extender, we'll just get it started on there, threads on just like a valve stem cap will. Let me get it down, and then it's got that nut on it, we'll use a 7/16-inch wrench for that. You can go in between the tires if you need to, but we don't need to have these super tight, we just want them to be tight enough, of course, where no air is going to escape..Let me see, that's on there, nice and stiff. And then we got that Chrome cap there.
Now we've moved that out either two, three or four inches. It makes it much easier to get to. Now there are other extenders available. This one comes straight out, so this is where we're going to use the straight line. But if you look at this one, you can see with this valve stem here, it points towards the inside.
So that's where like the reverse air chuck, you can kind of get in there, hook onto it and pull out on it. But using a bent extender like this helps us out in this situation. Just depending on what your application calls for. Just allows us to get these out here where it's much more easy to get air into our tires and maintain proper pressure.You can see it's got a nice bright finish to it. It's going to come with the metal cap. In some situations people like to switch the metal cap for just the standard black plastic ones. Sometimes corrosion can be an issue and make these a little tough to get off so just keep that in mind. This is the one that's been on here for probably about a year and a half and you can see the finish is still holding up really well. There weren't any issues with leaks or anything, just like this one here. It's been on there for about a year and a half too and really no major issues with corrosion or discoloration.Overall, guys, I think these are an excellent idea. Anytime we can make it easier to properly maintain our vehicle, we're going to do it more often. When tire pressures get low or if we don't check them often enough, it can cause safety issues. If not safety issues it can cause weird wear on our tires and things like that. So if I had a set of dual rear wheels like this, I would definitely extend them out, make them easier to get to, an easier to maintain.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Wheel Masters Tire Pressure Valve Extenders - Straight - 4" Long - Qty 2 - WM80294
Average Customer Rating: 4.8 out of 5 stars (68 Customer Reviews)
These straight valve extenders make it easy to access the valve stems on your tires. Each sturdy, nickel-plated brass tube is 4" long and screws onto your existing valve stem. Includes 2 extenders with caps.by: JCB11/23/2022
The quality seems very good. The extender is very sturdy and secured very well to the valve stem. I am very happy with the product and the shipping was fast.
by: Wayne 10/19/2023
Great! Perfect fit when the inner tire on my duals has the built in 90 degree valve stem
by: William 02/06/2024
Exactly what I ordered and timely.
by: Charles12/21/2023
Perfect fit and they work great!
by: Ray 03/16/2023
Gave me the distance needed to easily attach an add-on tire pressure sensor on inside duallies. Been working for about a year now.
by: Chris C10/08/2023
Hex nut allows you to tighten it with a small wrench, rather than a pair of pliers.
by: Bryan10/25/2022
Makes it much easier to check your tires without having to remove your wheel covers
by: Robert04/06/2022
worked so far
Robert
4/7/2023
well after a while one of the valves started leaking.so I removed all of them.
by: Thomas06/10/2022
Wouldn't buy this again. I have 2018 F450. Anyone with a dually knows what a pain it is to check and or add air to the inside rear tires. I had to bend these extensions to clear the outside wheels.
by: Leonard05/06/2022
The dual long stem and stabilizer extensions and my ability to check the tire pressure, are very effective and functioning , BUT one valve stem leaked 6 months ago and was replaced by American Tire in Palm Springs. Unfortunately I did not have them installed on the front tires of my RV.
by: Roger S.02/17/2017
These were very easy to install and were just as described - liked the price - shipped
quickly and the quality was well above what I expected - still on motorhome and no
leaks - makes checking air pressure a breeze now!
Roger S.
2/17/2018
Same as before - excellent product and like them even more.
by: Leonard 07/09/2021
As I said for the 2” extensions, the end that screws to the valve stem of the wheel spins like a garden hose end. So it is difficult to tighten to valve stem of inside dual unless you have small hands to reach through the holes on steel dual wheels and use a open end wrench. I had to use a crows foot, extension and ratchet to snug it up. This is the reason for the four star rating. Wish the would have put a fixed nut at the outer end of extension, that would have made my installation much easier. Product is good quality though.
by: Khanh05/11/2022
This is perfect for my inner tire of the dually on my motor home, it was so hard to put air into my tire, now it’s much easier and it’s made in the USA, it’s good quality. etrailer emails me every step of the way, from packaging, shipping and delivered, a very happy customer here.
by: Joe 10/29/2021
Made in the usa extensions with a hex for tightening them down properly. Straight up the best extensions ive found for sale (yeah i reviewed the 135 degree ones too). Etrailer does not disappoint and wheel masters has a far superior product thats made in the usa !!!! win win win
by: Edward 08/27/2022
They provided enough clearance to accomodate my pressure sensors on the inside duals.
by: Dino04/24/2018
Excellent Customer Service, also the 4' air valve extensions works excellent on my dually truck, much appreciations & thumbs up. !
by: Pete A03/02/2017
Simple product was as advertised. As ever, amazingly quick delivery from etrailer.
by: Brad S.11/29/2017
Fast, Easy to use and up to speed on tracking. Thanks would buy from again and tell others to do the same.
by: Mark 08/17/2022
Prompt delivery. Correct order. Great follow up.
by: David 08/20/2022
Arrived on time, in good condition, and well packed. Easy to install and use.
by: Stephen 08/25/2022
Works as design
by: George06/18/2022
George
6/19/2023
The end that screws onto the tire valve is not a rigid connection so these are difficult to install. I taped the end which allowed them to be installed.
by: George03/27/2018
Gave me all the information and took my order. Knowing I needed the items quickly he made sure the order was shipped in time. Notified me as soon as it shipped. Excellent service.
by: Stephen 10/21/2021
Stephen
10/22/2022
Just fine. I would purchase them again.
by: Scott 08/12/2022
fast service ez process
25
68
Show More Reviews
See what our Experts say about this Wheel Masters Accessories and Parts
- Can WheelMaster Valve Extender Be Left On and Installed with TPMSYes the Wheelmaster valve extenders like the # WM80294 can be left on when driving. They are designed to be a permanent so they would be perfectly fine to be left on. If you were going to use them with a TPMS sensor you'd want to use a sensor that is "flow through" like the # TST-507-FT-4-C and would install it between the extender and the valve stem.
view full answer... - Can Wheel Masters Tire Pressure Valve Extenders # WM80294 Work with TPMS SensorsYes, the Wheel Masters Tire Pressure Valve Extenders # WM80294 are compatible with thread on tire pressure monitor sensors. The treads of the extenders are also long enough to be used with the brand you have as well.
view full answer... - Valve Extenders For Motorhome That Can be Used With TPMSWe do have solid valve extenders for your motorhome that can be used with a tire pressure monitoring system, and come in different lengths, depending on what you need, the Wheel Masters Tire Pressure Valve Extenders - 2" Long # WM80292, 3" Long # WM80293, and 4" Long # WM80294. If instead you were referring to an inflation kit for a dually, the only options we offer are indeed the braided style: - Wheel Cover Mount: Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually # WM8208 -...
view full answer... - Does Tire Need to Be Balanced After Installing Wheel Masters Tire Pressure Valve ExtendersTrailer tires don't ever really need to be balanced. But if you were installing the Wheelmasters # WM80294 on a vehicle wheel it probably would be a good idea to have the balance checked. These are much lighter than they look though. The weight is .19 of a lb.for both.
view full answer... - Is The Wheel Masters Tire Valve Extender a Pressurized Extender? Yes, the Wheel Masters Tire Pressure Valve Extenders # WM80294 is a pressurized extension. When you install it on your steel valve stems you will open the schrader valve allowing air to travel both into and out of the extender.
view full answer... - Tire Valve Extension for Rear Dual Wheels on a Semi The Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long item # WM80292 can be used in any application where a straight 2-inch tire pressure valve extension is called for. These extenders are made of solid brass that is nickel plated for corrosion resistance. We also offer valve extenders in other lengths 4" item # WM80294, 3" item # WM80293, and the 90-degree extenders item # WM802990.
view full answer... - Availability of Longer Straight Valve Stem Extenders for Dually RV WheelThe longest straight valve stem extenders we offer are the # WM80294 which are 6 inches in length.
view full answer... - Do the Wheel Masters Valve Extenders # WM80294 Use The Original Valve Core To Hold Air In The Tire? Yes, the Wheel Masters Tire Pressure Valve Extenders # WM80294 will depress the valve core on your valve stem so that you will be able to add and release air through the extension. You can hear in the installation video linked below that when our technician is installing the extenders some air leaks out as he tightens on the extender. Once you have it installed there is a second valve core on the extender that will hold the air in.
view full answer... - Tire Pressure Valve Extenders for Dually Tires it really depends on how long of an extension you are needing for your 2021 F-350 Dually. We have the Wheel Masters Tire Pressure Valve Extenders 2" item # WM80292 you were looking at. We also have a Wheel Masters 3" extension item # WM80293, or a 4" extension item # WM80294. All of these valve extenders work with tire pressure sensors and are great with dually style tires.
view full answer... - Recommended Tire Pressure Valve Extenders For MotorhomeThe Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels # WM802990 technically are designed for the front wheels, but there are several customers that left reviews stating that it worked on their rear wheels. It really just depends on the layout of your current valve stems and if it requires a bend at all. I recommend looking into Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels # WM8029135 or Wheel Masters Tire Pressure Valve Extenders...
view full answer... - How to Determine if a Trailer Wheel is Steel or AluminumYou can perform the old magnet test to determine if your trailer wheels are aluminum or steel. The magnet will not stick to aluminum wheels. Also, If your wheel is painted or shows some rust, that is a good indication that it is a steel wheel. Aluminum trailer wheels are not usually painted and won't rust like steel wheels.
view full answer... - Recommended Valve Extenders for a 2016 Ford F-450 Cab & ChassisThank you for the picture that really does help figure out what'll be best for you. It appears for your right/left rear outside tires, you could benefit from an extender that has a bend in it, like the Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend # WM8029135. For your inside tires, I'd recommend going with a simple straight extension like the Wheel Masters Tire Pressure Valve Extenders - Straight # WM80293 which measures 3" long. We also have those straight extenders...
view full answer...
- Do Wheel Masters Valve Extenders Come With A Support Or Grommet For Holding Inside Of The Hand Hole?The Wheel Masters Tire Pressure Valve Extenders # WM8029180 do not come with any kind of support or rubber grommet for holding them inside the hand hole. The same is true for the 4" Straight # WM80294. Generally the 180 degree extenders is what we recommend for the dually sprinter wheels. As far as the Aloca wheels, it is hard to say for sure what extender you need without seeing the wheels. It completely depends on the location of the valve stem.
view full answer... - Can Tire Pressure Valve Extenders Be Left On While DrivingValve extenders like the Wheel Masters Tire Pressure Valve Extenders # WM8029 and Wheel Masters Tire Pressure Valve Extenders # WM80294 are designed to be left on while driving. This is the case with most valve extenders. However, if you come across a manufacturer that states they cannot be left on while driving then you should always follow the manufacturer recommendation.
view full answer... - Outer Valve Extensions with No-Drill Bracket for Motorhome The Wheel Masters 4-Hose Inflation Kit # WM8208 that you were looking at should work well for the wheels on your motorhome. The kit includes two 9-1/2" long braided steel hoses for the outer wheels and two 13" braided steel hoses for the inner wheels of a dually. The included mounted bracket simply gets clamped to the sides of the wheels so there isn't any drilling required for installation. I have attached a short video demonstration that you can check out as well. We don't have a...
view full answer... - What Tire Pressure Valve Extenders Work with the TireMinder i10 TPMS for RVsWhen using the TireMinder i10 TPMS for RVs # TM29FR, it is recommended to not use valve extenders. Obviously this is not always possible. But the manufacturer does state that if you do need extenders, you should use straight extenders that are steel or brass. They do state not to use braided extenders, for the reasons you mentioned. You would need extenders like those below: - Wheel Masters Tire Pressure Valve Extenders # WM80292 (2") - Wheel Masters Tire Pressure Valve Extenders # WM80293...
view full answer...
- Will the Wheel Masters Tire Pressure Valve Extenders # WM80294 Work on Aluminum WheelsThere is no reason you couldn't use the Wheel Masters Tire Pressure Valve Extenders # WM80294 on aluminum wheels. These just thread right on to the valve stem of a wheel so the wheel construction wouldn't matter. Check out the review video I attached for this product as well.
view full answer... - Should O-Ring be Replaced On Tire Valve Stem Extender that Was Leaking AirIt sounds like the o-ring in the valve extender such as # WM80294 may have dry rotted causing the leak. I do recommend a new o-ring which you could obtain from an auto parts store. But make sure the extender and tire valve stem are all clean and free of any dirt, debris, or corrosion which would negatively impact the seal. If you continue to have problems then I do recommend new extenders. And if you still have problems even after that then you may need to have a new valve stem installed...
view full answer... - Do Wheel Master Valve Stem Extenders WM80294 Require Additional BracingThe Wheel Masters Tire Pressure Valve Extenders # WM80294 do not need to be supported in addition to them just installing on the wheel. They will work great on your 2020 GMC Sierra as-is and would not require any additional support or bracing.
view full answer... - How Do I Remove My Hubcaps on My Motorhome in Order to Inflate My Tires?As far as finding the air valves for your motorhome tires, from the looks of your tires, you will need to remove the hub. In order to do this, it is best to use a flat-head screwdriver to pry off the cover between the cover the rim itself. The hubs simply pop off (there are no bolts that are holding them on). For making your life easier by not having to remove the cap every time you need to inflate your tires, I linked a product page of our available valve stem extenders like the Wheel...
view full answer...
- Are Wheel Masters Tire Pressure Valve Extenders WM80294 Suitable for Use on Dually WheelsWheel Masters Tire Pressure Valve Extenders # WM80294 can be used in any application where a straight 4-inch tire pressure valve extension is called for. These extenders are made of solid brass that is nickel plated for corrosion resistance. We also offer valve extenders in other lengths and with various degrees of bend, such as the 90-degree extenders # WM802990, and all can be seen on the linked page.
view full answer... - Dimensions of Wheel Masters Tire Pressure Valve Extenders - 180-Degree BendThe extension after the bend on the Wheel Masters Tire Pressure Valve Extenders - 180-Degree Bend # WM8029180 measures 2-7/8" so just shy of the 3" you're looking for. This is going to be the only 180 degree bend option available. For a 4" long straight extender made of the same nickel-plated brass we have the Wheel Masters Tire Pressure Valve Extenders - Straight - 4" Long - Qty 2 # WM80294.
view full answer...
- Availability Of Valve Stem Extensions For 2006 Dodge Sprinter 3500 With Dual Rear WheelsI would be happy to help! For your 2006 Dodge Sprinter 3500 DRW you will need the 4" extenders # WM80294 and the 90 degree extenders # WM802990 to get the 5" extension you are wanting with a 90 degree bend. We do not have anything that will secure these extenders to your wheels, so you will need to be a bit creative. Using a metal valve stem # AM20906 instead of rubber would be the best option for these extenders. For the outer wheels it really depends on how long of an extension you...
view full answer... - TST Tire Pressure Monitor Sensors for a Ford F-450 DuallyRegardless of whether you go with the cap style or flow through, they use the same monitor so you should be good to continue use with your current monitor. I would recommend sticking with the flow through sensors like the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 that you already have if they can fit your dually wheels. Since you already have some, you could remove them and test fit them first. Pretty much all valve stems have at least some rubber on them, more than likely...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Leah B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Joshua S
Video Edited:
Kathleen M
Written by:
David L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Noah M
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jcb
12/18/2023
The extenders have been working perfectly. No issues whatsoever. Many miles driven in my RV and they have not leaked.